Genesis by GFS
Guide to changing your Genesis ‘Multi-fit’ Gullet Plate
Produced from extra strength tempered steel, the Genesis Multi-fit gullet plates are made to fit your Genesis saddle. You will need to measure your horse with the Genesis Gullet gauge to find the correct sized gullet plate for your horse.(Click here for more info...)
Unscrew the two screws located left and right on the underside of the saddle. Please keep screws and washers safe.
Pull away the Velcro closure in the head of the saddle.
Pull the panel down from the point pockets freeing the front of the panel enabling you to see the gullet plate fitted into your Genesis saddle.
Remove the two screws at each end of the gullet plate.
Gullet plate is now removed.
Put your ‘changed‘ gullet in
place and ONLY partially
screw in place... do NOT tighten.
Partially secure one end
only.
Next secure the opposite end of the plate AGAIN do NOT tighten 100%. Once gullet is in place and the gullet arch is sitting neatly in the groove of the Genesis saddle tree, then secure the gullet 100% by tightening screws at both ends.
Re-fit the panel into the point pockets on both sides.
ENSURE that the panel is forced 100% into point pockets on the panel and re-align the panel securing in place with Velcro that holds the front of the panel to the head of the tree.
Re-fit the panel front screws fitting one side at a time and CAREFULLY ensuring that the panel screw goes into the socket on the tree.
Once one side is secure, pull the other side into place and align and fix in position using the Velcro on the tree and panel front.
Re-fit the final front panelscrew again ensuring that the screw goes into the socket on the tree.
To view an instructional video Click the screen below 
To download a pdf instruction sheet
Click here 
To view the Genesis Synthetic Saddle Range
Click here
Find a Genesis Stockist
Click here